Expressions are the most important building stones of PHP. In PHP, almost anything you write is an expression. The simplest yet most accurate way to define an expression is “anything that has a value”.

The most basic forms of expressions are constants and variables. When you type “$a = 5″, you’re assigning ‘5’ into $a. ‘5’, obviously, has the value 5, or in other words ‘5’ is an expression with the value of 5 (in this case, ‘5’ is an integer constant).

After this assignment, you’d expect $a‘s value to be 5 as well, so if you wrote $b = $a, you’d expect it to behave just as if you wrote $b = 5. In other words, $a is an expression with the value of 5 as well. If everything works right, this is exactly what will happen.

Slightly more complex examples for expressions are functions. For instance, consider the following function:

<?php
function foo ()
{
return 5;
}
?>

Assuming you’re familiar with the concept of functions (if you’re not, take a look at the chapter about functions), you’d assume that typing $c = foo() is essentially just like writing $c = 5, and you’re right. Functions are expressions with the value of their return value. Since foo() returns 5, the value of the expression ‘foo()‘ is 5. Usually functions don’t just return a static value but compute something.

Of course, values in PHP don’t have to be integers, and very often they aren’t. PHP supports four scalar value types: integer values, floating point values (float), string values and boolean values (scalar values are values that you can’t ‘break’ into smaller pieces, unlike arrays, for instance). PHP also supports two composite (non-scalar) types: arrays and objects. Each of these value types can be assigned into variables or returned from functions.

PHP takes expressions much further, in the same way many other languages do. PHP is an expression-oriented language, in the sense that almost everything is an expression. Consider the example we’ve already dealt with, ‘$a = 5′. It’s easy to see that there are two values involved here, the value of the integer constant ‘5’, and the value of $a which is being updated to 5 as well. But the truth is that there’s one additional value involved here, and that’s the value of the assignment itself. The assignment itself evaluates to the assigned value, in this case 5. In practice, it means that ‘$a = 5′, regardless of what it does, is an expression with the value 5. Thus, writing something like ‘$b = ($a = 5)’ is like writing ‘$a = 5; $b = 5;’ (a semicolon marks the end of a statement). Since assignments are parsed in a right to left order, you can also write ‘$b = $a = 5′.

Another good example of expression orientation is pre- and post-increment and decrement. Users of PHP and many other languages may be familiar with the notation of variable++ and variable–. These are increment and decrement operators. In PHP, like in C, there are two types of increment – pre-increment and post-increment. Both pre-increment and post-increment essentially increment the variable, and the effect on the variable is identical. The difference is with the value of the increment expression. Pre-increment, which is written ‘++$variable‘, evaluates to the incremented value (PHP increments the variable before reading its value, thus the name ‘pre-increment’). Post-increment, which is written ‘$variable++’ evaluates to the original value of $variable, before it was incremented (PHP increments the variable after reading its value, thus the name ‘post-increment’).

A very common type of expressions are comparison expressions. These expressions evaluate to either FALSE or TRUE. PHP supports > (bigger than), >= (bigger than or equal to), == (equal), != (not equal), < (smaller than) and <= (smaller than or equal to). The language also supports a set of strict equivalence operators: === (equal to and same type) and !== (not equal to or not same type). These expressions are most commonly used inside conditional execution, such as if statements.

The last example of expressions we’ll deal with here is combined operator-assignment expressions. You already know that if you want to increment $a by 1, you can simply write ‘$a++’ or ‘++$a‘. But what if you want to add more than one to it, for instance 3? You could write ‘$a++’ multiple times, but this is obviously not a very efficient or comfortable way. A much more common practice is to write ‘$a = $a + 3′. ‘$a + 3′ evaluates to the value of $a plus 3, and is assigned back into $a, which results in incrementing $a by 3. In PHP, as in several other languages like C, you can write this in a shorter way, which with time would become clearer and quicker to understand as well. Adding 3 to the current value of $a can be written ‘$a += 3′. This means exactly “take the value of $a, add 3 to it, and assign it back into $a“. In addition to being shorter and clearer, this also results in faster execution. The value of ‘$a += 3′, like the value of a regular assignment, is the assigned value. Notice that it is NOT 3, but the combined value of $a plus 3 (this is the value that’s assigned into $a). Any two-place operator can be used in this operator-assignment mode, for example ‘$a -= 5′ (subtract 5 from the value of $a), ‘$b *= 7′ (multiply the value of $b by 7), etc.

There is one more expression that may seem odd if you haven’t seen it in other languages, the ternary conditional operator:

<?php
$first ? $second : $third
?>

If the value of the first subexpression is TRUE (non-zero), then the second subexpression is evaluated, and that is the result of the conditional expression. Otherwise, the third subexpression is evaluated, and that is the value.

The following example should help you understand pre- and post-increment and expressions in general a bit better:

<?php
function double($i)
{
return $i*2;
}
$b = $a = 5; /* assign the value five into the variable $a and $b */
$c = $a++; /* post-increment, assign original value of $a
(5) to $c */
$e = $d = ++$b; /* pre-increment, assign the incremented value of
$b (6) to $d and $e */

/* at this point, both $d and $e are equal to 6 */

$f = double($d++); /* assign twice the value of $d before
the increment, 2*6 = 12 to $f */
$g = double(++$e); /* assign twice the value of $e after
the increment, 2*7 = 14 to $g */
$h = $g += 10; /* first, $g is incremented by 10 and ends with the
value of 24. the value of the assignment (24) is
then assigned into $h, and $h ends with the value
of 24 as well. */
?>

Some expressions can be considered as statements. In this case, a statement has the form of ‘expr ;‘ that is, an expression followed by a semicolon. In ‘$b = $a = 5;’, ‘$a = 5’ is a valid expression, but it’s not a statement by itself. ‘$b = $a = 5;’ however is a valid statement.

One last thing worth mentioning is the truth value of expressions. In many events, mainly in conditional execution and loops, you’re not interested in the specific value of the expression, but only care about whether it means TRUE or FALSE. The constants TRUE and FALSE (case-insensitive) are the two possible boolean values. When necessary, an expression is automatically converted to boolean. See the section about type-casting for details about how.

PHP provides a full and powerful implementation of expressions, and documenting it entirely goes beyond the scope of this manual. The above examples should give you a good idea about what expressions are and how you can construct useful expressions. Throughout the rest of this manual we’ll write expr to indicate any valid PHP expression.

Force www vs non-www to avoid duplicate content on Google Recently, it has been talked a lot about Google and duplicate content as well as Google Canonical problems.That is, when you have your site accessib...
while operator while loops are the simplest type of loop in PHP. They behave just like their C counterparts. The basic form of a while statement is: while (e...
Comentarios de Steve Jobs sobre la Tecnología Innovación y calidad La innovación es lo que distingue a los líderes de los seguidores La calidad es más importante que la cantidad. Un homerun es m...
Usando Twitter como Herramienta para Analizar el Mercado En Twitter fluye información de todo tipo y, por ejemplo, gracias a los trending topics podemos seguir los temas de los que más se está hablando en el...
Un fallo en Twitter podría dejar al descubierto los mensajes privados Un desarrollador se ha propuesto demostrar que los problemas de privacidad no son sólo cosa de Facebook, sino que Twitter también tiene algunos fallos...
Servidores en Colocación Las áreas para la colocación de servidores, también conocidas como "colos" u " hoteles", brindan el mismo tipo de servicios que los centros de alojam...
WordPress es el CMS mas utilizado en el Mundo Varios estudios desde hace ya unos años, vienen diciendolo, y es que el CMS WordPress es el mas utilizado en el mundo, WordPress lo usamos en nuestra ...
Mercadeo para tu Negocio En-Linea Si tienes un negocio que apenas está empezando, es lógico que no te convenga contratar un servicio especializado de Email Marketing, por tanto lo más...
Kaspersky Lab:Extensión alojada en Chrome Web Store secuestraba los perfiles de Facebook A través de un reporte de Kaspersky Lab se descubrió una extensión falsa de Adobe Flash Player para Chrome que permite a los atacantes tomar el contro...
La mayoría de tweets tienen 30 caracteres Interesante la gráfica que comparte con todos los usuarios de Twitter uno de los empleados de esta compañía, llamado Isaac Hepworth. Como se puede a...
Expressions on PHP
Tagged on: